Filter
Top Products
The System
- 45 -
5. Enter the system PIN. Use
DELETE
to make correction.
6. Press
OK
. The handset is deleted.
DEFINING LINE MATRIX
The line matrix feature allows you to assign privileges and restrictions on selected handsets from making and receiving calls.
Your phone supports 5 line matrix options.
Option What is it?
Line 1 In Line 1 response on receiving calls.
Line 2 In Line 2 response on receiving calls.
Line 1 Out Line 1 privilege on making calls.
Line 2 Out Line 2 privilege on making calls.
Ring Count This is the number of rings before a handset will ring and/or can answer a call.
This is used for Line 1 In and Line 2 In matrix option.
1. Press
MENU
.
2. Select SYSTEM. Press
OK
.
3. Select LINE MATRIX. Press
OK
.
4. Enter the system PIN. Press
OK
to confirm. Use
DELETE
to make correction.
5. Select the line matrix option. Press
OK
.
After selecting the option, refer to the respective sub-sections below to finish the operation.
Assigning line 1 or line 2 In setting
1. Select the handset you want to set. Press
OK
.
2. Select the option setting.
Setting What is it?
Blocked The handset will not ring and cannot answer calls until a certain number of rings have
completed (defined in the ring count setting below).
Normal The handset has no restriction on answering calls.
Interception The handset can answer calls anytime; however, the handset will not ring until a certain
number of rings have completed (defined in the ring count setting below).
3. Press
OK
to confirm. The new setting is saved.
Assigning line 1 or line 2 Out
Select the handset you want to set. Press
OK
.
4. Select the option setting.
Setting What is it?
Blocked The handset can only make emergency calls.
Normal The handset has no restriction on making calls.
5. Press
OK
to confirm. The new setting is saved.
Assigning ring count setting
1. Select LINE 1 or LINE 2. Press
OK
.
NOTE:
Caller ID. If line 1 or line 2 is set to BLOCKED or INTERCEPTION, your phone may not be able to
receive/display Caller ID depending on your ring count setting.