Filter
Top Products
Calling Features
- 40 -
3. Select PAUSE. Press
OK
.
4. Select the new setting.
5. Press
OK
. The new setting is saved.
PREFIX INSERTION
The prefix insertion feature automatically adds a prefix before a number that you have defined. Your phone checks if the number you
have dialed matches with the number you have defined in the menu. If it matches, the prefix you have defined will be added. If it doesn’t
match, the prefix will not be added.
For example, you set the prefix “604” and the number “555”. When you make a call “5551212”, “604” will be added before the number,
and then “6045551212” will be dialed out.
You can program up to 3 prefix/number combinations.
Activating prefix insertion
1. Press
MENU
.
2. Select ADVANCED. Press
OK
.
3. Select PREFIX. Press
OK
.
4. Enter the system PIN. Press
OK
.
5. Select the prefix you want to set.
6. Press
LEFT
or
RIGHT
to select ON. Press
DOWN
.
7. Enter the prefix (up to 8 digits) you want to insert. Press
DOWN
.
8. Enter the number (up to 8 digits) for checking.
9. Press
OK
when finished. The new setting is saved.
Deactivating prefix insertion
1. Press
MENU
.
2. Select ADVANCED. Press
OK
.
3. Select PREFIX. Press
OK
.
4. Enter the system PIN. Press
OK
.
5. Press
LEFT
or
RIGHT
to select OFF.
6. Press
OK
when finished. The new setting is saved.
PABX PREFIX
If you are connecting your phone to a PABX, you may need to enter an access code (e.g. 0) in order to get an outside line. You may
also need to enter a pause in the dialing sequence to allow time for the PABX to pick up an outside line.
The PABX prefix feature on this phone inserts and dials the PABX access code (up to 8 digits) and a pause before each call.
Setting up the PABX prefix
1. Press
MENU
.
2. Select ADVANCED. Press
OK
.
3. Select PABX. Press
OK
.
4. Enter the system PIN 0000. Press
OK
.
5. Press
LEFT
or
RIGHT
to select ON. Press
DOWN
.
6. Enter the PABX access code. Then Press and hold
to enter a pause. P displays on the screen.
7. Press
OK
when finished. The new setting is saved.
TIP: Leave the number blank if you want the prefix to be inserted to all outgoing calls.