Filter
Top Products
Call
- 8 -
3. Place the handset on the charging cradle. Charge for 14
hours before initial use.
CHECKING THE BATTERY LEVEL
The battery icon displays the current battery level.
= 100% full
= 60% full
= 30% full
= Empty. Require charging.
Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone while the battery is nearly
empty, you will hear warning tones. Your call maybe cut off shortly after the warning.
WALL MOUNTING THE BASE
Please use the following wall mount template to locate and install the mounting pins/screws if you prefer to wall mount your base unit.
The dimensions are shown in millimeters (mm).
1. Insert screws (not supplied) into the wall.
The recommended mounting screws are “Philips Pan Head Self-Tapping Screws” with diameter 4mm and length 20mm.
The diameter of the screw head and the screw should not be greater than 12mm and 5mm respectively.
2. Push the locking tabs of the wall mount bracket into the mounting holes at the back of the base unit.
3. Align the mounting holes of the wall mount bracket with the wall posts.
NOTE: Handset may get warm during initial charge. This is normal. The handset may take a few seconds to
p
ower u
p
.
CAUTION:
Other wall mounting methods are not recommended and may damage the product.