Filter
Top Products
Listening to Your Messages (cont'd)
1. Call your mailbox (see page 6).
2. Press L (5). The first or last message
plays (depending on programming).
●
When it's done, you hear: The message
will be erased when you exit your mail-
box. or The message has been saved.
Then you hear a mini menu of options. To
turn it on/off, see Auto Help on page 54.
3. Press L to listen to the next one.
●
If it's the last message, NVM-Series
says: Going to the first message, then
plays it. If you were listening in reverse
order, NVM-Series says: Going to the
last message, then plays it.
First Time Logon Tutorial
When you call (log onto) your mailbox for the first time, NVM-Series
may play a recorded Announcement and Tutorial to guide you in the
basics for using your mailbox. The Announcement Message may be
something like this:
●
Welcome to Your New NVM-Series Mailbox.
The Tutorial tells you how to record a Mailbox Greeting/Name and assign a
Mailbox Security Code. The Announcement Message and Tutorial will play
this one time only. They will not play during any subsequent log-ons. If you
need instructions later for recording a Mailbox Greeting, Name and/or set-
ting a Security Code, turn to Recording a Mailbox Greeting/Name (on page
48) and Using Mailbox Options (on page 50), respectively.
Using the Listening Options
You can use the following options while listening to a message in a
Subscriber, Message Center, Guest or Future Delivery Mailbox. You
can activate an option while the message is playing or right after it
finishes playing. To hear these options while listening to a message,
press zero. (See also Listening to Your Messages on page 27.)
To Listen to your
Messages
28
Listening to Messages
17600sug05.qxd 3/13/01 12:01 PM Page 28