Filter
Top Products
5
Figure 2. Bottom View of the 8411 Voice Terminal
!
Routing
channel
Line jack
Adjunct
jack
Handset
jack
for line cord
and adjunct
cord
ADJUNCT
LINE
Kickstand
The various components which appear on the bottom of the 8411 voice terminal are shown in
Figure 2 and listed and explained below.
Handset jack
This jack is for connecting a handset, with handset cord, to your
voice terminal. The jack is labeled
.
Adjunct jack
This jack is used for connecting an external speakerphone (such
as an S101A or S201A Speakerphone) or a headset adapter (such
as a 500A Headset Adapter) to your voice terminal.
The jack is labeled “ADJUNCT.”
Line jack
This jack is used for connecting a line cord to your
voice terminal. The jack is labeled “LINE.”
Routing channel
Thread the line cord (and adjunct equipment cord,
if applicable) through the routing channel.
Kickstand
Can be lifted from the deskstand or can be left level with the
bottom of the voice terminal. Check which kickstand adjustment
allows you the best viewing angle of the display. (Only the 8411D
has a display.)