Filter
Top Products
23
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, AutCB, appears on the second line of one of the feature option screens.
To place a call using an AD
list button or code
1 Press or or
or Dial appropriate AD List code:
• List 1 __________
• List 2 __________ [dial tone]
• List 3 __________
Note: An may also be available;
see your system manager.
2 Dial desired list item (1, 2, 3...)
• Call is automatically dialed [ringback tone]
Automatic Callback
Pers List Grp List Sys List
Enhcd List
To automatically place
another call to an extension
that was busy, did not answer,
or returned call waiting
ringback tone
1 If you are using an 8411 with a display, press and then
press the softkey below AutCB during call attempt
If your 8411 does not have a display or if AutCB is not
available on your display, press during call
attempt [confirmation tone]
Note: If you send your calls to coverage after activating
Automatic Callback, you callback calls will still ring at your
extension and will not be redirected to coverage.
2 Hang up
• You will get a 3-burst priority ring when both you and the
called extension are idle; when you answer, regular
ringing is sent to the called party
3 Lift handset when you hear priority ring
Note: Automatic Callback is automatically canceled after 30
minutes.
Menu
AutoCallBk