Filter
Top Products
34
Note: When you are talking on the handset, the Mute feature affects the microphone associated
with the handset rather than the speakerphone.
This feature has no effect on an external speakerphone attached to your voice terminal.
Mute
To prevent the other
party from hearing you (To
mute the handset
or speakerphone microphone)
1 Press
• Red light next to goes on and the other party
cannot hear you
2 When you are ready to resume conversation with the other
party, press again
• Red light next to goes off and the other party can
hear you again
Note: When the voice terminal is set for the Speaker (listen-
only) feature, the light next to goes on whenever you are
using the speaker.
The Mute feature turns off automatically when you hang up, or
switch from the speakerphone to the handset or from the handset
to the speakerphone.
✔
Mute
Mute
Mute
Mute
Mute
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, PCall, appears on the second line of one of the feature option screens.
Priority Calling
To place a priority call
(3-burst ring)
1 If you are using an 8411 with a display, press and then
press the softkey below PCall
(while on-hook or off-hook)
If your 8411 does not have a display or if PCall is not
available on your display, press
(while on-hook or off-hook)
or Dial Priority Calling access code __________
(while on-hook or off-hook) [dial tone]
2 Dial the extension [ringback tone]
• Wait for called party to answer
Note: If your call is not answered and you wish to redirect it
to coverage, press while call is ringing.
Menu
Priority
Go to Cvr