Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
43
Last Number Redial
Lift handset.
Dial 5 5 2
Storing Station Speed Dial Numbers
Lift handset.
Dial 5 5 5
Dial station speed dial number. 000~099
Dial speed dial number you wish to store.
‘Flash’ the hook switch.
You will hear confirmation tone and hang up.
Using Station Speed Dial Numbers
Lift handset.
Dial ✱ 7
Dial the desired station speed dial number, 000~099,
Using System Speed Dial Numbers
Lift handset.
Dial ✱ 7
Dial the desired system speed dial number, 2000~3499,
Establishing a Conference Call
The system allows you to set up a 3-way conference call.
Lift handset.
Call the desired party. (outside or internal)
‘Flash’ the hook switch.
Dial the internal extension number.
When the other party answers, ‘flash’ hook switch
twice in 2 seconds. (All three parties are now connected.)
Message Waiting
Lift handset.
Dial the desired extension number.
No reply from a key station or busy tone from an SLT station.
‘Flash’ the hook switch.
Dial ✱ 6 6 .
Hang up.
Call Forward
Lift handset.
Dial 5 5 4
Dial the desired call forward number.
1 - Unconditional, 2 - Busy calls
3 - No answer calls, 4 - Busy/no answer calls
5 - Station off-net, unconditional
6 - Station off-net, no answer
7 - Incoming outside line off-net (ATD only)
# - Cancel previous forward
To make Call forward to VMIB, press # key after
dialing call forward type (1~4).
Dial the station / group number to forward calls to.
Station numbers: 700~827 / Group numbers: 620~624
Hang up.
To cancel Call Forward, lift handset and dial 5 4 4 and #.
Or, dial 5 5 9 To Clear All.
For “Follow Me” Call Forward
Go to the forwarding station and lift handset.
Dial 5 5 4
Dial 0.
Dial the station number that calls are to be forwarded.
Dial the authorization code of forwarded extension.
(The authorization code should be registered
before "Follow Me" Call Forward can be set.)
Dial the extension number that will receive the call.
Hang up.
Placing an Outside Call
Lift handset.
Dial 1.
Dial the desired number.
Placing an Intercom Call
Lift handset.
Dial intercom number.
Placing an Outside Call on Hold
While connected to an extension call, briefly depress and
release the hook switch (‘flash’ the hook switch).
OR ‘Flash’ 5 6 0 for System Hold.
Retrieving a Held Outside (CO) Call
Lift handset.
Dial 4 # and CO line number
. Eg 4#01~4#40
On SLT, you can dial 4 ✱ in case you don't remember the
held CO number.
Placing an Outside Call via CO Group Access
Lift handset.
Dial 4 and CO group number
. Eg 401~424
Dial the desired number.
Placing an Outside Call via CO Individual Access
Lift handset.
Dial 4 8 and CO line number
. Eg 4801~4840
Dial the desired number.
Re-directing an Incoming Call (Call Pick-up)
When you hear a phone ringing in your area,
Lift handset.
Dial ✱ 4 2
Dial the extension number of the ringing phone.
Group Call Pick-up
When hearing an unattended phone ringing in your area,
Lift handset.
Dial ✱ 1
You will be connected to an incoming extension or outside
line call. (NB: You must be in the same pick-up group. – check
with your installer.)
Call Wait (Camp-on)
After receiving intercom busy tone, dial ✱.
Camp-on tone is heard in the called station.
The called station receives the ringing from camped on call
when hanging up from original call.
Answering a Waiting Call
You will receive warning tone in handset.
Hang up the present call to take a new one.
Making a Screened Transfer
While connected to an outside line, ‘flash’ the hook switch.
Dial the desired extension number and wait to be answered.
Announce the call.
Hang up to complete call transfer.
Making an Unscreened Transfer
While connected to an outside line, ‘flash’ the hook switch.
Dial the desired extension number
Hang up to complete call transfer.
Single Line (Analogue)
Telephone
Analogue Single Line Telephone User Guide for aria Telephone Systems