Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
40
To set Room to Room Call Group,
Press TRANS/PGM button.
Dial # 4 1
Dial Group Number (00~99).
Dial the room range.
Press HOLD/SAVE button.
To remove from group as above, dial 1 7 after TRANS/PGM button.
Button Procedures
If you wish to split the hotel rooms into groups for internal calls, this can be done from system attendant. Once the groups
have been set up then only guests in the same group can call each other internally.
Room to Room Call Group (at Front Desk)
To assign room rate at the system attendant,
Press TRANS/PGM button.
Dial # 5 1
Enter the room rate bin no.
Enter room cost and name.
Dial HOLD/SAVE button.
Button Procedures
This feature allows the system attendant to assign room rate among 20 different ones to individual rooms. This information
is included in the Total Room Charge Bill which is printed out on the SMDR and on check-out.
Room Rate Assign (at Front Desk)
Hotel Operation
Room Rate Assign (Cont’d)
To assign a range of rooms the same room rate,,
Press TRANS/PGM button.
Dial # 5 2
Enter the room range.
Enter the room rate bin no.
Dial HOLD/SAVE button.
Button Procedures
This feature allows the system attendant to assign room rate among 20 different ones to individual rooms. This information is
included in the Total Room Charge Bill which is printed out on the SMDR and on check-out.
In case a guest checks in and checks out in the same day, part time fee may be charged according to the room type or hotel
policy. Each room type may have up to 6 fields for the different part time range and fee.
Fee for Part Time (at Front Desk)
To register/change fee for part time table at system attendant,
Press TRANS/PGM button.
Dial # 6 3
Dial fee for part time (00~31).
Enter time range. (Press Flex. BTN 1 and dial the time with 4 digits.)
Enter change rate for the part time. (Press Flex. BTN 2 and dial fixed 3 digits from 000 to 100.)
Press HOLD/SAVE button.
To erase, press SPEED button instead of dialing.
Button Procedures