Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
15
Intercom Features
Message Waiting
Procedures
If a called party does not answer, press CALLBK button.
Hang up.
At that time, the LED of CALLBK button in the called station is
flashing.
Range
On LKD-2N/S, 8D/S,
If a called party does not answer, press TRANS/PGM button
and dial ✱ 6 6
To answer a message waiting,
Press flashing CALLBK button.
Station that left message will be signaled with tone ring.
On LKD-2N/S, 8D/S,
Dial ✱ 6 7 to answer a message waiting.
When the called extension does not answer the call, you can leave a message wait to the station.
Button
Button Procedures
If your phone has been programmed to have Do Not Disturb,
Press DND/FWD button while on-hook or your phone is ringing.
The LED is lighting and your phone is in DND.
To remove Do Not Disturb,
Press DND/FWD button while on-hook.
The LED is extinguished and DND at your phone is removed.
Range
On LKD-2N/S, 8D/S,
Dial 5 5 3 instead of pressing DND/FWD button (Toggle setting).
Do Not Disturb
Button Procedures
Lift handset or press MON button. (The MON button is illuminated.)
Press DND/FWD button.
Press the call forward type:
0 - Follow me
1 - Unconditional
2 - Busy calls
3 - No answer calls
4 - Busy / no answer calls
5 - Station off-net, Unconditional
6 - Station off-net, No Answer
7 - Incoming outside line to off-net (Attendant only)
Dial station number
or press DSS button or intercom group.
Confirmation tone is heard and DND/FWD button is flashing.
Hang up.
To activate call forward to VMIB,
Lift handset or press MON button.
Press DND/FWD button.
Dial desired Call Forward code (1~4).
Dial VMIB selection code # to receive the call.
Hang up.
Range
Sta. No.
700~827
ICM. Group
620~634
Call Forward
A call can be forwarded to the other station, station group or VMIB depending on the call forward type. It should be
programmed in Admin. Programming to use some of the Call Forward types.