Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
13
CO Line Features
Button Procedures
Lift handset or press MON button.
Press flashing CO line button. If a CO line button is not assigned, dial 2.
You will be connected to ringing outside line.
Range
Universal Night Answer
When CO lines are programmed for UNA and the system is placed into night mode, users can
answer incoming CO line calls employing dial code regardless of pick-up group.
Press TRANS/PGM button.
Dial 1 2
Dial 1 for Hands-free, 2 for Tone ring, or 3 for Privacy announce.
Press HOLD/SAVE button.
Button
Procedures
Changing Intercom Answer Mode
Button Procedures
Dial intercom number or press programmed DSS button.
You will hear,
- Ring back tone in TN (Tone) mode. Wait for called station to answer the ringing.
- 3 bursts of tone in HF(Hands-free) or PV(Privacy) mode. Begin your announcement
after the tone.
Placing an Intercom Call
Answering an Intercom Call
Button Procedures
With your intercom answer mode setting,
- in TN mode, intercom ring is heard. Lift handset to talk.
- in PV mode, 3 bursts of tone and one-way announcement is heard. Lift handset to talk.
- in HF mode, 3 bursts of tone and announcement is heard. Reply with Hands-free
mode or lift handset for privacy.
Range
If your phone has ICM button, you may put an intercom call on hold by pressing
HOLD/SAVE button.
Or, while on an intercom call, press ICM button.
The ICM button flashes and intercom dial tone will be heard.
To retrieve intercom call on hold,
Press the flashing ICM button and lift handset.
Button Procedures
Range
Placing an Intercom on Hold
Range
Range
Changing Differential Ring
Button Procedures
Press TRANS/PGM button.
Dial 1 1
Select the ring type by dialing 1~4.
Press HOLD/SAVE button.
Range
Intercom Features