Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
16
Intercom Features
Button Procedures
-For Follow-me, programme the station that you will be forwarded to i.e. if your extension is
702 and you are forwarding to 704, then you will need to go to 704 to program the feature. Also,
this feature requires authorisation code and requires system programming.
-For Station Off-net, the number you are forwarding to should be saved as a speed dial
number first. (Please see Speed Dial Number.)
-For Incoming outside line to Off-net, it requires system programming.
To cancel call forwards,
Lift handset or press MON button.
Press DND/FWD button and dial #.
Hang up.
- To cancel Incoming Outside line to Off-net (at system attendant),
Press MON + DND/FWD + CO line code (CO group/CO line no. /CO BTN) + #
Range
Sta. No.
700~827
ICM. Group
620~634
On LKD-2N/S, 8D/S,
Dial 5 5 4 instead of pressing DND/FWD button.
Call Forward (cont)
Paging
Button Procedures
To make a page,
Lift handset.
Dial page zone. (See below chart.) And you will hear warning tone.
After the tone, speak your message.
Hang up.
Range
All Call # 6 Internal Zone 1 # 0 1
Internal Zone 2 # 0 2 to ….. Internal Zone 15 # 1 5
Internal All Call # 7 External Zone 1 # 4 1
External Zone 2 # 4 2 External Zone 3 # 4 3
External All Call # 5 Meet Me Page # #
Internal Zones:
01~15
A station, which is allowed to access page facilities, can connect and transmit voice announcement to any or all of the
system external/internal page zones.
To answer paging, (meet me page)
Go to the nearest key telephone.
Lift handset and dial # #
or HOLD/SAVE button, and you will be connected to the paging party.
Range
Flash
Button Procedures
While connected to an outside line, press FLASH button.
May disconnect outside line and re-seize dial tone if programmed . It can be used to send a recall to line, when the system is
connected with a PBX or Enhanced Feature Analogue Line.
To activate speakerphone,
Press MON button.
Dial outside line number or intercom number to talk.
Button Procedures
Range
Pressing an outside line button, a speed button, a station button or dialing a station number will automatically activate the
speakerphone. (LKD-2N/S has no microphone and doesn’t function as Hands-free unit.)
Speakerphone