Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
27
Attendant Operation
Button
Procedure
To change the date format on the LCD,
Press TRANS/PGM button.
Dial 0 4 4
The format toggles between DDMMYY and MMDDYY. (YY : year, MM : month, DD : date)
Changing Time/Date Format
To change the time format on the LCD,
Press TRANS/PGM button.
Dial 0 4 5
The format toggles between 12-hour mode and 24-hour mode. (YY : year, MM : month, DD : date)
Button
Procedure
To store system speed numbers,
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin
.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
Enter Speed Dial NAME (to 16 characters). HOLD/SAVE.
Or,
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin
.
Press desired outside line button.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
Enter Speed Dial Name (to 16 characters). HOLD/SAVE.
To use system speed numbers,
Press SPEED button.
Dial speed number bin
.
To edit a speed dial Name,
Press the MUTE key to edit the Name without changing the stored number.
A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide
speedy access to often used outgoing CO dialing numbers.
System Speed
Dial Range:
2000~3499
System Speed Dial
Range
Attendant Intrusion
Button
Procedure
To assign a flexible key as the Intrusion button
Press TRANS/PGM button.
Press the desired flexible key to be registered.
Press TRANS/PGM button.
Dial 8 6.
Press HOLD/SAVE button.
To activate attendant intrusion
Press DSS button corresponding to the busy station you wish to call. (Busy tone is heard.)
Press ATD INTRUSION button. (Intrusion warning tone is heard in the busy station, then a 3-way
conference is set up.)
Attendant may intrude into any station which is in conversation with a CO line.
CO Outgoing Disable
Button
Procedure
To disable outgoing calls a CO line,
Press TRANS/PGM button.
Dial 0 7 3
Press the desired outside line button. (Confirmation tone is heard.)
After hearing confirmation tone, selected outside line button is disabled.
Repeat the process to enable the CO line.