Filter
Top Products
ʅ
ʅʅ
ʅ aria 130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
17
Intercom Features
Button Procedures
In speakerphone mode, press VOLUME (▲/▼) button to control the speakerphone volume.
Button Procedures
When bell rings, press VOLUME (▲/▼) button to control ring volume.
Ring Volume Control
Speaker Volume Control
Range
Range
Button
Procedures
Range
To make an intercom group call,
Lift handset or press MON button.
Dial the intercom group number
.
ICM. Group No.
620~634
Placing an Intercom Group Call
Placing a CO Call on Hold
Button Procedures
Press HOLD/SAVE button.
-Once
for system hold - Twice for exclusive hold
Reverse if hold preference is programmed to system hold.
Press HOLD/SAVE button
To retrieve the call,
Lift handset and press flashing outside line button.
Range
Group Call Pick-up
Button Procedures
Range
You should be in the same pick-up group as ringing phone.
You hear an unattended phone ringing.
Lift handset or press MON button.
Dial ✱ 1
System Features
Conference
Button Procedures
Range
To establish a conference,
Call desired party. (internal or outside)
Press CONF button. (CONF button is lighting and the called party is put on exclusive hold.)
Call the next party.
Press CONF button twice. (once if adding additional parties)
Conference is established.
To add another party in the conference,
Press CONF button.
Call the next party.
Press CONF button twice.
To exit a conference (unsupervised),
Press CONF button in the supervisor station and hang up. Other parties are still connected.