Filter
Top Products
User Guide for the Kyocera 3250 Phone 1
1GETTING STARTED
Installing the battery
1. Hold the phone face down.
2. Press down on the latch on
the back of the phone and
pull off the battery door.
3. Place the battery in the
phone casing with the
metal contacts facing the
antenna end of the
phone.
4. Place the battery door notches
in the opening near the
bottom of the phone. Push
down on the door until it
clicks into place.
Charging the battery
You must have at least a partial charge in the battery to
make or receive calls.
Fully charge the battery before
using the phone
.
To charge the battery, connect
the AC adapter to the jack on
the side of the phone (as
shown), then connect the
adapter’s plug into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery: You can safely recharge the
battery at any time, even if it has a partial charge.
82-K5960-1EN.book Page 1 Monday, May 3, 2004 10:47 AM