Filter
Top Products
10 Using Push To Talk
Note: If you change a PTT contact’s phone number,
then you have to delete the existing contact name from
the contacts list and add the individual’s name again.
See “Adding New PTT Contacts” on page 9.
Refusals
There are t wo types of refusals possible when you’re
adding new PTT contacts:
Manual—PTT contact received your message, but
refused your invitation to be added to your PTT contact
list. The message, “Contact Name Not Added” appears.
Select
OK return to PTT main menu.
Service Driven—PTT contact has not responded to
your invitation within a 3-minute period. This means
the PTT contact’s phone is off, or that the phone is out
of the service area. The message, “Contact Name Not
Added” appears. Select
OK to return to PTT main
menu. Try adding this PTT contact later.
Erasing individual PTT contacts
1. Select Menu → Push To Talk → Erase Contact.
2. Highlight the PTT contact name you wish to erase.
3. Select Next. The message, “Erase Contact(s)?”
appears.
4. Select Yes to erase the contact. The message,
“Sending request to erase contact(s)...” appears.
– When the message is successful, “Request
Sent” appears.
– When the message is unsuccessful, the bong
tone sounds and “Unable to erase contact(s) at
this time. Try again later” appears.
Erasing PTT call history
See page 19 to erase call history.
Checking your contacts’ availability
Your Kyocera 3250 phone lets you know when PTT
contacts are:
Available —contact can accept calls.
Do Not Disturb —calls cannot be sent to contact.
Off-Line —the handset is turned off, or the contact
is not registered with the voice network.
Note: Off-Line is a network-dependent option that you
cannot choose.
82-K5960-1EN.book Page 10 Monday, May 3, 2004 10:47 AM