Filter
Top Products
20
english
Jabra GO 6430 USER MANUAL
6.6 CONTROLLING THE SPEAKER VOLUME AND MICROPHONE
The headset features a touch panel that is similar to the touch pad included with many laptop computers.
Use it to adjust the volume you hear in your headset and to mute/unmute the microphone.
- Slide your finger up the touch panel (away from your mouth) to increase the volume.
- Slide your finger down the touch panel to decrease the volume.
- Double-tap on the touch panel to mute or unmute the microphone.
Figure 13:
2 x
Using the volume strip and mute control
Note:
- Unique double-tones in the headset indicate that you have reached maximum or minimum volume.
See also the section “Headset Signal Tones”
- A unique double-tone indicates that microphone muting is active. This signal repeats occasionally until
you unmute the microphone.
If you end the call while the microphone is muted, it is automatically umuted the next time you place or
answer a call.
6.7 SWITCHING BETWEEN YOUR PHONE AND HEADSET
It is possible to enable or disable the headset without interrupting your current call. The procedure is intuitive but
slightly different depending on which type of phone you are using, as outlined below.
- For mobile phones, the procedure for switching to and from the headset varies by phone model. Please see
your mobile phone documentation for details.
- For softphones, your headset is likely to be your only option, but if other audio devices are connected to your
PC, you may be able to switch to them by changing the audio preferences for Windows and/or your softphone
program.
6.8 LAST NUMBER REDIAL
Jabra GO is able to send a redial command to the current target phone. This feature requires that the target
phone supports the redial command; check your phones’ documentation for details.
To use last-number redial with a phone that supports it:
1. If necessary, set the appropriate phone as the current target for your headset (see also Section 6.2: The Target
Phone Concept).
2. Double-tap the headset’s multifunction button. Jabra GO sends the redial command to the selected target
phone and opens the audio link.