Filter
Top Products
19
english
Jabra GO 6430 USER MANUAL
6.4 HOW TO ANSWER A CALL
To answer a call from any connected phone:
1. You will hear a ringtone from the ringing phone and/or headset. The ringtone played in the headset normally
also indicates which phone is ringing (see also Section 7.5: Headset Controls and Signals). The headset will
usually automatically switch the target phone to the one that is ringing.
2. Tap the multifunction button on the headset. You can also answer a call using the native controls of your
mobile phone or softphone. If you are using an unsupported softphone, then you must always use the
softphone’s native interface to answer a call.
Figure 11:
Answering a call
Note: If you are using an unsupported softphone, you need to manually open a PC audio communication
link from your softphone to your headset before answering. You can do this in Jabra Control Center (see
the PC Suite online help for details. See also Chapter 5: Installing and Running the Jabra PC Suite).
6.5 HANGING UP
To terminate a call when no calls are on hold, Tap the headset multifunction button. You can also terminate a call
using the native controls of your mobile phone or softphone. If you are using an unsupported softphone,
then you must always use the softphone’s native interface to hang up.
Figure 12:
Hanging up