Filter
Top Products
1 - 1
1
Agency Information
Dolphin 9900, 9950, and 9951 terminals meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these guidelines
carefully before using your Dolphin terminal.
Label Locations
Laser Safety Label
If the following label is attached to your product, it indicates the product contains a laser engine or laser
aimer:
Laser Eye Safety Statement: This device has been tested in accordance with and complies with
IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER
PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
Caution - use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Dolphin 9900 Dolphin 9950 & 9951
Compliance Label
Compliance Label
LASERLIGHT. DONOTSTAREINTOBEAM.
CLAS S 2LAS E R PRODUCT.1.0mWMAX
OUTPUT: 650nM. IEC60825-1:1993+A1+A2
Complies w ith21 CFR 1040.1 0and1040.1 1
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
Scan Rate
=35+/-5Scans/Sec.
LASER LIGHT. DO NOT STARE INTO BEAM.
CLASS 2 LASER PRODUCT
1.0 mW MAX OUTPUT: 650nM
IEC60825-1: 1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
SE1200 Laser Scan Engines Image Engines with Integrated Laser Aimers
!