Filter
Top Products
1 - 2
LED Safety Statement
The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified
to be a Class 1 LED device.
The maximum power outputs for each diode are as follows:
• Illumination LED: 194.0 uW, wavelength: 626nm+/-30nm
• Aimer laser (5300 engine): 360.1 uW, wavelength: 655nm
• Aimer LED (5100 engine): 81.6 uW, wavelength: 526nm+/-30nm
• Laser (9951 models): <1.5 mW, wavelength: 650nm, scans/second (bidrectional): 35 (+/- 5)
Infrared LED Safety Statement
Caution - Do not view directly with optical instruments.
The maximum power outputs for the IR LED is 145.1 uW. LEDs are pulsed at a frequency of 115,200
Hz with a duty cycle of 18.75% where the “ON” time of a single pulse is 1.6275 x 10
-6
seconds.
UL and C-UL Statement
UL and C-UL listed: UL60950-1 and CSA C22.2 No. 60950-1-03, ISA 12.12.01:2007
CAN/CSA: C22.2 No. 213-M1987
The following notes apply to 99XXXXX-XXXXXXI units (Hazardous Location rated. See Approvals by
Country on page 1-3.).
Note: This equipment is suitable for use in Class 1, Division 2, Groups A, B, C, D, Class II, Division 2
Group G, Class III or non-hazardous locations only.
Note: Maximum operating ambient temperature rating 50°C.
Note: Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the global
positioning system (GPS) hardware, GPS operating software or other GPS-related aspects of this
product. UL has only tested for the explosion, fire, shock and casualty hazards required by the
applicable hazardous locations standards. UL certification does not cover the performance or
reliability of the GPS hardware, GPS operating software or other GPS-related aspects of this
product. UL makes no representations, warranties or certifications whatsoever regarding the
performance or reliability of any GPS-related functions of this product.
!