Filter
Top Products
7 - 10 Rev C
4/30/2008
Dolphin® 7850 Mobile Computer
User’s Guide
Connections Manager
The connections manager sets up various network connections to Internet Service Providers (ISPs) via
an external modem.
If you are using one of the on-board wireless radios to connect to a network, do not enter network
parameters in the connections manager. The Dolphin terminal uses the radio’s settings to connect to the
network.
Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). The zero-config WLAN
feature of Windows Mobile is
disabled
on Dolphin terminals.
To open the connections manager, tap Start > Settings > Connections tab > Connections icon .
The connection manager opens displaying the Tasks tab.
Task Tab
The Task tab enables you to initially configure, then manage network settings when using a modem.
Select an item in this list and then complete the setup screens that follow with the appropriate information
for your network.
My ISP
The links under this heading enables you to add and manage modem connections to an ISP. To complete
the setup screens, obtain the following information from your ISP:
• ISP dial-up access telephone number
• Username
• Password
• TCP/IP settings
My Work Network
These links enable you to establish the following connections types:
• Modem
• Virtual Private Network (VPN)
• Proxy server connection
To complete the setup screens, obtain the network parameters from your system administrator.