Filter
Top Products
Dolphin® 7850 Mobile Computer
User’s Guide
Rev C
4/30/2008
7 - 9
3. Tap and hold the item and select Beam File.
4. The information begins transmitting to the other infrared device.
Receiving Data
1. Verify that the terminal is set to receive all incoming beams; see Verify Beam Settings on page 7-8.
2. Align the IrDA ports.
3. Have the owner of the other device send the information to you via infrared.
4. Your terminal automatically begins receiving it.
Adding Programs via Infrared
Select a program on one terminal and beam it to another to load additional software programs to Dolphin
terminals.
Troubleshooting
If the Beam Settings are not set to receive or you’ve aligned two IrDA ports and the terminal is still not
receiving, tap Start > Programs > Infrared Receive. The terminal searches for the sending device.
If the terminal cannot find the sending device, the following message appears: