Honeywell 7600 PDAs & Smartphones User Manual


 
Dolphin® 7600 User’s Guide Rev D
11/20/2007
9 - 5
Troubleshooting
If you encounter problems with the QuadCharger, refer to chart below for possible solutions. If problems persist, please contact
Technical Assistance (see page 11-2).
Problem Issue
The Status LED does not come on when
I insert a battery pack into a slot.
Check the power connections on the Dolphin QuadCharger; make sure
the POWER switch is ON and the battery pack is properly seated.
The Status LED lights red during
charging.
Try to charge the battery in one of the other charging slots. If the red
Status LED comes on again, then the problem is associated with the
battery pack. If the red status stays with the charging slot, the problem is
associated with the charging circuitry.
The Status LED lights red and stays on
without a battery in the charging slot.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Hand Held Products Product Service and Repair
(see page 11-1) to request an RMA.