Filter
Top Products
Using the Wireless LAN
User’s Guide 9–3
Getting Started with the Wireless LAN
Powering the WLAN On or Off
To use WLAN on your iPAQ Pocket PC, you need to turn on
WLAN and set up your device.
To turn the WLAN on or off:
1. From the Today screen, tap Start > iPAQ Wireless.
2. Tap the WLAN icon.
If the WLAN is powered on, the WLAN icon on the iPAQ
Wireless screen will turn from orange to green and the
Wireless LAN indicator, located to the left of the power
button, will blink green to indicate WLAN is on or alternate
between blinking green and blinking blue if Bluetooth is also
turned on.
Shortcut: If you have enabled Wireless LAN using Start >
iPAQ Wireless, from the Today screen, tap the Connections
icon ( or ), then tap Turn Wireless On or Turn
Wireless Off.
Note: Even though the indicator flashes to indicate WLAN is
turned on, it does not necessarily mean a connection has been
established with another device or access point.
If the WLAN is powered off, the WLAN icon will turn from
green to orange.