Filter
Top Products
Chapter 7 | Using Channels and Inbox| 61
5. In the Select a modem dropdown list, make sure the
modem you have inserted is selected. If the modem
name does not appear here, the modem may not be
inserted fully. Remove and reinsert the modem, then
check the modem list again.
6. Tap Next and fill in the country code, area code, and
phone number provided by your Internet Service
Provider. Tap Finish. A new icon with the name you
specified appears in your Connection folder. This
connection also appears on the Start menu in the
Communication submenu.
You should not need to change any settings in the Configure
or TCP/IP Settings dialog boxes. Most ISPs now use server-
assigned addresses. If the ISP you are connecting to does not
use server-assigned addresses, enter the addresses in the
TCP/IP Settings dialog box. When finished, select Next.
Setting up Inbox
Before you can send and receive e-mail, you need to set up Inbox
to use the connection you just created.
To setup Inbox to use a dial-up connection to your
ISP or corporate network
1. From the Start menu, tap Inbox.
2. Tap Compose, Options, the Services tab, and then
the Add button. The Services window is displayed.
3. If the connection is to an Internet service provider,
select Internet Mail as the service name. Tap OK. The
Service Name window is displayed.