Filter
Top Products
Chapter 11 | Troubleshooting| 101
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting viewing problems
viewing problems viewing problems
viewing problems
If you are having trouble viewing your data, here are some
suggestions.
Screen is blank
If the device does not respond when you briefly press the On
button:
• Make sure your battery cover is locked.
• Adjust the display contrast. On some devices, the screen can
darken or lighten to the point that it appears to be powered
off. For information on adjusting contrast, see the Using the
Settings tab section in chapter 4.
• Reset the device. After a full reset, the screen remains blank
for approximately 3 seconds after pressing the On/Off button.
• Charge the main battery by connecting to AC power.
• After a full reset, the screen remains blank for approximately
3 seconds after pressing the On/Off button.
Screen is dark
Prolonged exposure to direct sunlight may cause your device
screen to temporarily darken. This is normal for LCD screens
and is not permanent.
Screen is hard to read
The display can be hard to read if the P/PC has been off for a
long time. The display returns to normal after using it for about
1 minute.
If you are having a hard time viewing a Note Taker document,
try changing the size of the view. To do this, tap the Zoom arrow
on the command bar and select a zoom percentage.
If you are having a hard time viewing Calendar, Tasks, or
Contacts data, try enlarging the display font. To do this within
Calendar, Tasks, or Contacts, tap Tools, Options, and then
select Use large font.