Filter
Top Products
9
CONNECTING THE TELEPHONE LINE
1. Connect one end of the telephone line cord to the LINE jack on the
bottom of the wall base unit.
2. Connect the other end of the telephone line cord to a telephone jack
on the wall.
3. Raise the antenna on the base.
CONNECTING THE AC (ELECTRICAL) POWER
1. Plug the wall base unit into an electrical outlet.
2. Make sure that its pins are inserted fully into the outlet and it is firmly
installed. If not, choose another electrical outlet to plug into.
HANDSET
NOTE: The handset battery compartment cover are
packaged together.
1. Connect the battery to the jack located inside the battery compartment.
NOTE: It is important to maintain the polarity (black and red wires)
to the jack inside the compartment as shown in the illustration.
2. Close the battery compartments by pushing the cover up until it snaps
into place.
page
Insert another phone
RED
WIRE
PRESS DOWN
FIRMLY
CHARGE FOR 12 HOURS
CONNECT BATTERY AND
INSTALL COVER
PRIOR TO USE
BLACK WIRE
BATTERY