Filter
Top Products
23
1. Make sure the handset is OFF (not in TALK mode).
2. Press and hold the format button on the handset until you hear a beep
and
PRESS AND HOLD BASE PAGE KEY
shows in the display.
3. Move the handset close to the wall base unit.
4. Press and hold the page button on the wall base unit.
NOTE: You must press the page button on the wall base unit within
30 seconds to continue registration.
5. You will hear a confirmation tone when the registration is complete,
and the handset’s display shows
REGISTERED
.
RECEIVING A CALL
1. Press TALK/CALLBACK button and begin speaking.
2. When finished, press TALK/CALLBACK again to hang up.
MAKING A CALL
1. Press TALK/CALLBACK button, when you hear a dial tone, dial a
telephone number.
OR
Dial the phone number first, then press the TALK/CALLBACK button.
2. When finished, press the TALK/CALLBACK button again to hang up.
LINE IN USE
When the Spacemaker® speakerphone is ON (in TALK mode),
LINE IN
USE
shows in the display of the handset if it is OFF (not in TALK mode).
3-WAY CONFERENCING
When the Spacemaker® speakerphone is engaged with an external call
(
LINE IN USE
shows in the handset display), press the TALK/call back
button on the handset to start the 3-way conference.
NOTE: Ift he handset is ON, press the speaker button on
Spacemaker®. The speakerphone will join the call, too.