Filter
Top Products
22
3. Press the flash/program button to store (if a change is made, you will
hear a confirmation tone).
LOCAL AREA CODE
1. Press flash/program button until
SET AREA CODE - - -
shows in the
display with the first digit blinking.
2. Use the dial pad to enter your local area code.
3. Press the flash/program button to store (if a change is made, you will
hear a confirmation tone).
TONE /PULSE DIALING
Set your phone according to the type of service you are subscribed to.
1. Press flash/program button until
SET TONE/PULSE TONE PULSE
shows in the display.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select
TONE
or
PULSE
.
TONE
is the default.
3. Press the flash/program button to store (if a change is made, you will
hear a confirmation tone).
DEFAULT SETTINGS
If you prefer to use the system’s original settings, follow the steps below
to return the answering system to the factory default settings.
1. Press flash/program button until
DEFAULT SETTING YES NO
shows
in the display.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select
YES
or
NO. NO
is
the default.
3. Press the flash/program button to confirm.
4. If you select
YES
, you will hear a confirmation tone, and the handset
resets to the following default values:
LANGUAGE ENGLISH
LOCAL AREA CODE - - -
TONE/PULSE DIALING TONE
HANDSET OPERATION
REGISTRATION
The handset and the Spacemaker® unit are pre-registered to the wall
base unit. If your handset or Spacemaker® unit is not registered, follow
these steps: