Filter
Top Products
36
STORING A NAME AND NUMBER IN MEMORY
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Press the desired memory location (0 through 9).
4. Press the mem button again. The display shows
ENTER NAME
.
NOTE: If you don't want to enter the name, skip step 6.
5. Use the handset’s touch-tone pad to enter a name (up to 15
characters). More than one letter is stored in each number key.
For example, to enter the name Bill Smith, press the two key twice for
the letter B, press the four key three times for the letter I, and press the
five key three times for the letter L. After one second, press the five
key three times again for the second letter L and press the one key to
insert a space between the letter L and S. Press the seven key four
times for the letter S, press the six key once for the letter M, press the
four key three times for the letter I, press the eight key once for the
letter T, and press the four key twice for the letter H.
NOTE: If you enter a wrong letter, press channel/delete button to
backspace.
6. Press the mem button to save the name. The display shows
ENTER
TEL NUMBR
.
7. Use the touch-tone pad to enter the area code followed by the
telephone number you want to store (up to 24 digits).
8. Press mem again to store the number. You will hear a
confirmation tone.
CHANGING A STORED NUMBER
1. Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2. Press the mem button and
REPLACE MEMO?
shows in the display.
3. Press TONE*/exit to exit, or press the memory button to store the
number. You will hear a confirmation tone.
STORING A REDIAL NUMBER
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the REDIAL button.