Filter
Top Products
16
SET LANGUAGE
>ENG FRA ESP
SPACEMAKER® UNIT SETUP
DAY/TIME SETUP
The day/time display has a 7-day a week and 12-hour format with an AM/
PM indicator. All messages recorded by the answering system will be
stamped according to this clock.
1. Press and hold the DAY/TIME CHECK button to set the day of the week.
2. Press and hold the HOUR button to set the hour.
3. Press and hold the MIN button to set the minute. When you press and
hold the MIN button, the time advances in 5-minute intervals.
4. Press and release the day/check button to hear the current day and
time settings.
RINGER SETUP
The Ringer Switch is located in the charge cradle of the Spacemaker®
Unit, and is pre-set to LO.
NOTE: If you turn the ringer off, the display shows when the unit
is in standby mode.
SYSTEM SETUP
There are eight programmable menus available: Language, Area Code,
Tone/Pulse Dialing, Contrast, Answerer ON/OFF, Ring to Answer, Security
Code and Default Setting.
NOTE: Press the EXIT button to exit a programmable menu or
return to standby mode.
LANGUAGE
Set the display language to show messages in either English, French
or Spanish.
1. When speakerphone is OFF (not in TALK mode), press flash/program
button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to
point at
SET LANGUAGE
, press flash/program button to show
SET
LANGUAGE ENG FRA ESP