GE 26976 Cordless Telephone User Manual


 
11
MOUNTING HARDWARE PACKED WITH YOUR UNIT
4 –1/4” Spacers 4 – Washers
4 –1/2” Spacers 4 – Cord hooks
4 – 1” Spacers
4 – 2” Phillips head screws
1 – Mounting template
BEFORE MOUNTING
CAUTION: To reduce the risk of fire, do not place any heating
or cooking product beneath this unit.
•Select a location to mount the Spacemaker® unit
•Make sure that there is an electrical outlet nearby
•Follow the section of Installing the Phone and Telephone Operation to
check if the phone works well at the selected location
•Follow the section of Radio Operation to check if the radio works well
at the selected location
Disconnect the AC power supply to the Spacemaker® Unit
when mounting.
Empty the contents of the cabinet under which the unit is to be mounted
and thoroughly clean the underside to remove any greasy residue. We
recommend the unit be mounted at the front edge of the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit
to a depth of at least 3/8". If the overall length from the bottom of
the cabinet shelf to the bottom of the overhang is more than 5/8",
you will need to use a wood shim. The shim can be located between
the cabinet shelf bottom and the spacers. Make sure the wood is at
least as thick as the excess over 5/8". If a shim is necessary, longer
screws (available at most local hardware stores) are required.
PrintedinChina
Model26976A
CUTOUTONSOLIDBLACKLINE.
CORTESOBRELALÕNEAS”LIDANEGRA.
CUTOUTONSOLIDBLACKLINE.
CORTESOBRELALÕNEAS”LIDANEGRA.
CUTOUTONSOLIDBLACKLINE.
CORTESOBRELALÕNEAS”LIDANEGRA.
FoldGuidelinesfor
Cabinetwithoverhang.
LÌneasdeguÌaparaserdobladas
enlapartesobresalientedelosgabinetes.
Sinohayunapartesobresaliente
lapartedelanteradelaPlantilla
debeserigualconelborde
delanterodelCabinete.
Ifnooverhang
FrontedgeofTemplateshould
beevenwithfrontedgeofCabinet.
FRONT
FRENTE
CUTOUTONSOLIDBLACKLINE.
CORTESOBRELALÕNEAS”LIDANEGRA.
SEE INSTRUCTION BOOK:
Be sure to select the correct height provided
spacers to position this unit at the proper distance
below the front edge of your cabinet. This will
provide access to the handset. Handset will be
slightly below the bottom of your cabinet when
properly installed.