Filter
Top Products
39
SETTING THE TIMER
At the handset
1. Make sure the handset is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit
(minutes) blinks in the display.
4. Press the desired number 0-9.
5. After the first digit is entered, the second digit blinks.
6. Continue entering digits for the number of seconds you want to set.
At the Spacemaker
®
unit
1. Make sure the speakerphone is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit
(minutes) blinks in the display.
4. Press CID VOL(-) arrow key to change the value of the blinking digit.
5. Press CID VOL(+) arrow key to blink the next digit.
6. Continue entering digits for the number of seconds you want to set.
NOTE: Maximum timing period is 99 minutes 99 seconds, while one
minute equals 60 seconds.
STARTING THE TIMER
When the countdown time is set,
1. Press the timer button to start counting down. You will hear a
confirmation tone.
2. When the countdown time expires,
TIMER ON 00 MIN 00 SEC
shows in
the display, and an alarm sounds for two minutes.
STOPPING THE TIMER
When the phone is OFF (not in TALK mode), press the TONE*/exit or
timer button to stop the countdown and return to standby mode.
NOTE: The timer stops automatically if the battery charge is low
or empty.