Filter
Top Products
30
SCREENING CALLS FROM THE SPACEMAKER
®
You can screen incoming calls by waiting for the caller to begin leaving a
message (to hear who it is), then pick up the handset and press the TALK/
CALLBACK or speaker button on the Spacemaker® unit to talk to the
caller. The answering machine automatically stops recording when you
activate the handset or pick up an extension phone.
TIP: Make sure the volume on the Spacemaker
®
is set loud enough to
hear your incoming calls.
MESSAGE PLAYBACK
The Spacemaker
®
display lets you know when you have messages. To
play messages, press the play/stop button.
While a message is playing, you can do the following:
•Press the play/stop button to stop the message playback.
•Press and release the review button to restart the current message;
continue to press and press again the review button to go to
previous messages.
•Press and release the skip button to go to the next message.
ANSWERING SYSTEM MEMORY FULL
When the memory is full, the system answers after 10 rings , and an “
F
”
displays after the number of messages, e.g.
MSG 59F
, on the right side of
the Spacemaker
®
display. You should erase some of the messages so the
answering machine can record new messages.
ERASING MESSAGES
Erase messages two ways: one message at a time with the erase button
or you may delete all messages with one long press of the erase button.
•To erase a message while its playing, press and release the erase button.
•To erase all messages, press and hold the erase button for 2 seconds
until the unit beeps and
ERASE ALL MESSAGES?
shows in the display.
Press erase again to confirm, or press exit button to cancel.