Filter
Top Products
19
1. When speakerphone is OFF (not in TALK mode), press flash/program
button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to
point at
RING TO ANSWER
, press flash/program button to show
RING
TO ANSWER 3 4 5 6.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select the desire rings to
answer. Default is
5
.
3. Press the flash/program button to store (if a change is made, you will
hear a confirmation tone).
SETTING THE SECURITY CODE FOR REMOTE ACCESS
The product provides you with the ability to access the answering system
from a tone dialing telephone in another location. A security code is
required for remote access, and it prevents unauthorized access to your
answering system. Default security code is 1 2 3, and you may only
change the security code at the Spacemaker® Unit.
SPACEMAKER® UNIT
1. When speakerphone is OFF (not in TALK mode), press flash/program
button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to
point at
SECURITY CODE,
press flash/program button to show
SECURITY CODE 1 2 3
with the first digit blinking.
2. Press CID VOL(-) arrow key to change the value of the blinking digit.
3. Press CID VOL(+) arrow key to blink the next digit.
4. Press the flash/program button to store (if a change is made, you will
hear a confirmation tone).
DEFAULT SETTINGS
If you prefer to use the system’s original settings, follow the steps below
to return the answering system to the factory default settings.
RING TO ANSWER
3 4 >5 6
SECURITY CODE
1 2 3