Filter
Top Products
12
Cut out the template on the line indicated. The template size and screw
hole positions are identical to the top of the unit.
MOUNTING PROCEDURE
1. If your cabinet does not have an overhang:
a) Position the template in the desired location on the underside of the
cabinet, flush with the front edge of the cabinet.
b) Tape the template in place and go to step 2.
If your cabinet has an overhang:
a) Measure the thickness of the overhang.
b) Fold the front of the template downward along the printed guideline
closest to the thickness of your cabinet.
c) Tape folded-down portion to backside of the overhang, and tape the
template to the cabinet underside.