DeWalt IPAQ H3000 PDAs & Smartphones User Manual


 
2. Push the card, connector-side first into the slot until it stops.
1. Close all applications on your iPAQ H3000 that have open files on the CompactFlash
card.
2. Lever the CompactFlash card out of the slot using a fingernail.
Your iPAQ H3000 automatically recognizes a wide range of CompactFlash cards
approved for use with ActiveSync. If you are ever instructed to install card-specific
iPAQ H3000 drivers provided by a CompactFlash card manufacturer, be sure to install
only device drivers specifically designed for the operating system on your iPAQ
H3000. If you are unclear about installation instructions, call your CompactFlash card
manufacturer for more information.
Some CompactFlash cards consume large amounts of power. To avoid battery drain-
age when using a CompactFlash card, connect your iPAQ H3000 to AC power wher-
ever possible.
If the battery is very low, you should not attempt to save data to a CompactFlash card.
This may result in the loss of data. First connect to AC power.
Do not turn off your iPAQ H3000 or remove the CompactFlash card when you are in
the middle of performing an operation, such as saving data to your CompactFlash
card.
Keep your CompactFlash card in a protective case when not in use to protect it from
dirt and moisture.