Filter
Top Products
If you were not provided with a power cord for your iPAQ 3000 Pocket PC or for an AC
power accessory intended for use with your device, you should purchase a power cord that
is approved for use in your country.
The power cord must be rated for the product and for the voltage and current marked on
the product’s electrical ratings label. The voltage and current rating of the cord should be
greater than the voltage and current rating marked on the product. In addition, the diame-
ter of the wire must be a minimum of 0.75 mm
2
/18AWG, and the length of the cord must
be between 5 feet (1.5 m) and 6.5 feet (2 m). If you have questions about the type of power
cord to use, contact your Compaq authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items
placed upon it or against it. Particular attention should be paid to the plug, electrical outlet,
and the point where the cord exits from the product.
!