Filter
Top Products
• Make sure the network to which you are trying to connect supports the Point-to-Point
Protocol (PPP). Your Internet service provider or network administrator can verify
this.
• Verify that the location is correct. Tap then Settings. On the Connections tab, tap
Modem. On the Dialing tab, make sure that Location reflects your current location.
Tap Dialing Patterns to make sure the correct sequence of numbers is being dialed.
For information on dialing patterns, see Connections Help on the iPAQ H3000.
• Verify that you are using the right phone number for the modem you are trying to
reach. Tap then Settings. On the Connections tab, tap Modem. Tap the connection
then Next and double-check the phone number you are trying to reach.
• Make sure the modem is firmly seated and connected to your iPAQ H3000 and the
telephone jack.
• Disable call waiting. Tap then Settings. On the Connections tab, tap Modem. On
the Dialing tab, select Disable call waiting. Then enter the disable code specified by
your telephone company.