Filter
Top Products
Connecting the IP Phone 2004
components
Before you begin
CAUTION
Damage to Equipment
Do not plug the IP Phone into a regular telephone jack. This
results in severe damage to the IP Phone 2004. Consult your
system administrator to ensure that you plug your telephone into
a 10/100BaseT Ethernet jack.
See "IP Phone 2004" (page 6) for the location of the connectors.
Step Action
1
Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2
Choose one of the following connections:
•
For an IP Phone not sharing LAN access with a PC, connect one
end of the CAT5 line cable to the LAN Ethernet port (identified
by a LAN icon) located on the back of the phone. Plug the other
end of the CAT5 line cable into the IP network.
•
For an IP Phone sharing LAN access with a PC, connect one
end of the CAT5 line cable to the LAN Ethernet port (identified by
a LAN icon) located on the back of the phone, and the other end
to the IP network. Insert a second CAT5 line cable into the PC
Ethernet port located on the back of the phone (identified by a
PC icon) and the other end into the computer Ethernet port.
9