Filter
Top Products
Changing your password 41
Changing your password
Follow this procedure to change your password.
If you are unfamiliar with how to use the dialpad to enter text, see "Using the
dialpad to enter text" (page
45) before you perform this procedure.
Step Action
1
From the main menu, open the User menu.
2
From the User menu, select and open Password.
The Old Password screen appears. The system prompts you to
enter your old password.
3 Use the dialpad to enter the old password.
4
After you enter the old password, use the dialpad to enter the new
password in the same screen.
5
Press Ok.
The password is changed and you return to the previous menu.
Use the new password the next time you log on.
—End—
43
Testing the local mode
The Diagnostics menu is mainly used by an administrator for registering the
terminal with a Survivable Remote Gateway.
Follow this procedure to test the local mode.
Step Action
1
From the main menu, open the Diagnostics menu.
2
From the Diagnostics menu, select and open Test Local Mode.
A confirmation screen appears.
3
Press Ok.
4
Press Yes.
The terminal transitions to its secondary IP address and temporarily
disconnects from the PC Client.
—End—
29