Filter
Top Products
Using the Assign menu 27
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the screen
for the active feature. For example, if your secondary Directory Number
(DN) is configured on screen two, and you receive a call to that number, the
feature screens scroll to page two. You can answer the call immediately
without searching for the screen.
Follow this procedure to enable or disable the AutoScroll feature.
Step Action
1
From the main menu, open the Feature menu.
2
From the Feature menu, select and open Assign.
The Assign menus opens.
3
From the Assign menu, select AutoScroll.
4
Press Ok.
The AutoScroll screen appears.
5
Perform one of these actions:
• To enable autoscroll, select Enable.
•
To disable autoscroll, select Disable.
6
Press Ok.
A check mark appears beside the option you selected. You return to
the Assign menu.
—End—
Enabling or disabling the Inbox
Follow this procedure to enable or disable the Inbox feature.
Step Action
1
From the main menu, open the Feature menu.
2
From the Feature menu, select and Assign.
The Assign menu opens.
18