Filter
Top Products
NOTE: After transferring the call to the remote end of the E & M tie
line, you will have created an unattended conference, and your
telephone will appear as though it were on hold.
6.
Press TAP button to rejoin the transferred call.
7.
After rejoining the conference, press # to place the call on hold
again (creating another unattended conference) or hang up to
terminate the call.
* You can eliminate this step if the installer has configured your
system for quick transfer and you are accessing the E & M line
with a group access code.
If one of the parties does not hang up or you have not terminated the call,
the call will return to you when the line-to-line connection timer expires.
• To set up a conference call on an E & M tie line,
1. Make first call.
2.
Press CONFERENCE; call is placed on hold automatically.
3. Select next line and make next call.
4.
Press CONFERENCE to establish conference.
5.
Press TRANSFER/CONFERENCE button to add more parties
for up to a 7-party conference (including yourself).
• To continue conversation on remaining line after other outside lines
have dropped out of conference,
1. Press the line button of the remaining party.
• To retrieve a line from hold and bring that party back into the
conference,
1.
Press TRANSFER/CONFERENCE.
2. Press line button.
3.
Press TRANSFER/CONFERENCE.
NOTE: If all the conference circuits are busy, you will not be able to
add a party to the conference.
7 – 24 Large Screen Speakerphone Manual
Using The Other Telephone Features GCA70–349