Vertical Communications 8412F Telephone User Manual


 
3.2 Dialing Automatically
This feature provides one- or two-button speed dialing using
programmable buttons at which you have previously stored numbers.
Two levels of number storage are available at each storage location, and
you can use one or both levels as needed. Further, since you usually store
a line choice as part of a speed dial number, line selection is automatic
with speed dialing. This user’s guide discusses button programming in a
separate section. Refer to it when you are ready to store numbers at the
programmable buttons.
There are two types of speed dial numbers: (1) numbers that you store
for your own use (personal speed dial numbers), and (2) numbers that the
system attendant stores for everyone’s use (system speed dial numbers).
To automatically dial a speed dial number stored at one of the
programmable buttons on your station,
1. Press preprogrammed speed dial button (line selection is usually a
part of the stored speed dial number),
—OR—
press preprogrammed SHIFT button, then press preprogrammed
button (to choose number stored as a second choice at that
button).
With your station idle, you can automatically dial a personal or system
speed dial number stored at a dial pad location.
To speed dial a personal speed dial number stored at the dial pad,
1.
While on hook, press speed dial number on dial pad (0–9).
To speed dial a system speed dial number stored at the dial pad,
2. While on hook, press S and then dial system speed dial number
(000–999).
NOTE: If you are already on a line, you must press SHIFT before
dialing the personal or system speed dial numbers that are
stored at the dial pad. Also, if a speed dial’s preselected line is
in use, the speed dial will not engage.
NOTE: On some systems, due to site requirements, the available system
speed dial codes are S100–S299 and S100–S599.
3 – 2 Large Screen Speakerphone Manual
Making Calls GCA70–349