Filter
Top Products
7.15 Setting The Volume Control
The volume control on your telephone is a multipurpose control you can
use to set the volume (loudness) of the ringer, the speaker, the handset,
the headset, background music, and the group listening mode. You can
either press and hold down the VOLUME UP or VOLUME DOWN
button to automatically step through the volume levels for each mode, or
you can press the switch once for each change in volume you desire.
You may adjust the loudness of the distant party at any time during a call
whether you are listening over the speaker, the headset, the handset or
the group listen mode by pressing the VOLUME UP or VOLUME
DOWN button. When the call ends, the system resets the loudness of all
future calls to the programmed (default) setting.
You can set a permanent loudness level for any volume control setting.
When loudness is at desired level, press the SAVE button. The level will
remain at this loudness (referred to as the default setting) until you
change the setting.
NOTE: The Impact SCS 8412S-** and SCS 8412F-** support the
optional ICVOL-** handset. The ICVOL-** is an amplified
handset with its own volume control, making it useful in noisy
environments. For ordering information, contact your Comdial
dealer.
• There are four ringer loudness levels (plus an off position). Set these
levels as follows:
1.
While your telephone is on-hook and idle, press the VOLUME
UP or VOLUME DOWN button once for each change in
loudness you desire. The ringer sounds once for each change as
an example of the current setting.
2.
Press the SAVE button.
NOTE: If you set the ringer to the “off” position, your telephone will
sound a short ring burst once for each call you receive at your
station while the ringer is off.
Large Screen Speakerphone Manual 7 – 13
GCA70–349 Using The Other Telephone Features