Vertical Communications 8412F Telephone User Manual


 
To answer a call-waiting tone if you receive one while on a call,
1. Hear short tone burst in receiver.
2. Either place current call on hold or complete call and hang up
(waiting call will ring at your telephone).
3. Lift handset to answer call.
You may, of course, choose to ignore the call-waiting tone and remain on
the line with your original caller.
3.11 Overriding A Call Or A
Do Not Disturb Condition At
Another Telephone (Executive Override)
You can override a call in progress or a Do Not Disturb condition at
another telephone if the system installer has enabled the executive
override feature at your telephone. (If the feature is not enabled through
programming, an error tone will sound and screen options will remain
displayed.)
To override an in-progress call at another telephone,
1. Make intercom call and hear a busy signal.
2.
Dial 03 (all parties will hear several tone bursts).
3. Join in-progress call.
To override a Do Not Disturb condition at another station,
1.
Press OVERRIDE to disable the Do Not Disturb condition at the
called station.
2. Speak your announcement (if in voice-first mode) or hear
ring-back tone (if in tone-first mode).
NOTE: This action disables DND condition at the other telephone until
DND is reset.
Large Screen Speakerphone Manual 3 – 13
GCA70–349 Making Calls