Filter
Top Products
38 78-16798-02
Using Phone Settings
You can personalize your Cisco Unified IP Video Phone by adjusting settings, as described in the tables
below. Keep in mind a few tips when you review this information:
• Most settings are accessible on your phone, but a few are accessed online from your User Options
web pages. See the
“Logging In to the User Options Web Pages” section on page 44 for more
information.
• If (Settings button) is not responsive, your system administrator may have disabled this
button on your phone. Ask your system administrator for more information.
Adjusting the Volume
The table below describes how to adjust and save volume levels on your phone.
If you want to... Then...
Adjust the volume
level for a call
Press (Volume button) during a call or after invoking a dial tone.
Doing so adjusts the volume level for the currently active audio mode. For
example, if you increase the volume while you are using the handset, you do
not affect the speakerphone volume.
Press Save to preserve the new volume as the default level for this audio
mode. If you adjust the handset, headset, or speakerphone volume without
saving the change, the volume will revert to the previously saved level the
next time that you use that audio mode.
Adjust the volume
level for the ringer
Press (Volume button) while the handset is in the cradle and the
headset and speakerphone buttons are off. The new ringer volume gets saved
automatically.