Filter
Top Products
Configuring the Cisco Secure Server for LEAP
This subtask guides you through a basic Cisco Secure ACS configuration. It will support LEAP on a Cisco
7920, for the user that you assigned to the Cisco 7920 in a previous section of this document. A complete
explanation of this process is beyond the scope of this document. However, the online help provided with the
Cisco Secure ACS is very comprehensive.
Step−by−Step Instructions
The instructions in this section guide you through the minimum steps that are required to configure LEAP
authentication parameters on the Cisco Secure ACS.
Log in to the Cisco Secure ACS.1.
Click the Network Configuration button to navigate to the Network Configuration page.
You will see a page with these areas:
2.