Filter
Top Products
Pruning VLANs Enabled: 2−1001
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: none
Appliance trust: none
Issue the show interface fastethernet 2/3 switchport command to verify that the Cisco Aironet 1200 AP port
is configured correctly. In the next sample output, you can see these settings:
The port is in Trunk mode.•
The Trunking Encapsulation is dot1q.•
The Native Mode VLAN is 1.•
2924XL# show interface fastethernet 2/3 switchport
Name: Fa2/3
Switchport: Enabled
Administrative mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1−10
Pruning VLANs Enabled: 2−1001
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: none
Appliance trust: none
Issue the show interface fastethernet 2/2 switchport command to verify that the Cisco 7960 IP Phone port is
configured correctly. In the next sample output, you can see these settings:
The port is in Trunk mode.•
The Trunking Encapsulation is dot1q.•
The Native Mode VLAN is 1.•
The Voice VLAN is VLAN2.•
2924XL# show interface fastethernet 2/2 switchport
Name: Fa2/2Switchport: Enabled
Administrative mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1−10
Pruning VLANs Enabled: 2−1001
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: 2
Appliance trust: none