Filter
Top Products
To edit the SSID, select the required one from the Current SSID List and edit it.
Because the configuration requires the use of Open Authentication, check Open Authentication in
the Authentication Settings area (it is checked by default, if you have not changed it).
3.
Click Apply−All to apply the SSID and the Authentication settings for all of the Radio interfaces; or
click Apply−Radio0 to apply the settings only to Radio0.
4.
When this popup warning appears, click OK:5.
Choose Security > Encryption Manager to configure the WEP keys.
In the Encryption Modes area, click the WEP Encryption radio button, and select
Mandatory.
a.
Click the Encryption Key 1 radio button to set it as the Transmit Key, and enter the same
WEP key that you entered in the Cisco 7920 (in this case, 1234567890abcdef0987654321).
b.
6.